-->

Nov 3, 2009

Screen Care Tips


Monitor screen is one of the tools or components that are useful in the computer world, monitor as a video display unit (VDU) show any information generated by the central processing unit (CPU). For that the existence of a computer monitor is good to use or not, if the monitor can not display the information although the cpu works well it means nothing without the monitor.


Because of the importance of the monitors this article gives a little tips that can be done by anyone who uses computer as a data processor.


Monitor is the same as other electronic equipment that has electronic circuit consisting of condenser, transistor, resistor, integrated circuit (IC) and other components. These components can work if there is a tension that obtained from the electric voltage. The Voltage must also be stable, so the monitor can be stable too, it is necessary to note special tips to help keep the monitor durability and long lasting.


First Tips on caring the monitor, is not justified to close the monitor with a cloth, plastic on top of the monitor ventilation because monitors are electronic devices that also produce heat, so heat produced by the process of a working monitor must be disposed off or expelled through ventilation holes, so that the ventilation must not be closed during the monitor usage. If you want to close the CRT monitor to avoid the dust, it should be done after the work is completed and the monitor was not used.


Second tips on caring the monitor, avoid putting liquid on top of the monitor because of liquid is a well electrically conducting material so that if liquid is spilled into the monitor causing a short circuit resulting in electronic components damage inside the monitor.


The third Tips on caring the monitor, always clean the dust off the monitor screen as often as possible in order to reduce the entry of dust into the monitor. Dust also has an iron elements that are a conductor. so dust can also cause short circuit on monitors.


The Fourth Tips on caring the monitor, use a good stabilizer with motorized to avoid the ups and downs of the electrical voltage so the voltage changes do not affect directly to the electronic components inside the monitor.


Attention! those tips can only be done on the outside of the monitor, while the inside of the monitor should only done by an experienced technician because inside the monitor still has a high voltage even though monitor was dead, so it is very dangerous.

Writted by : Kangmus // 10:33 PM
Kategori:

0 Respons:

Post a Comment